Cleats and Restraints

Cleats and Restraints

 

Cleats and Restraints

 

Cleats

Inset (Web) Cleats

Floors designed using the inset system make maximum use of available headroom.

The secondary floor beams are connected within the depth of the primary supporting beams thus minimising the overall depth of the floor structure.

All cleats are manufactured from pre-galvanised material as follows:

 

Oversail (Flange) Cleats

The oversail system with top flange cleats may be used where there are no restrictions on floor depth.

The maximum allowable overhang should be no greater than one eighth of the adjecent span.

All cleats are manufactured from pre-galvanised material as follows:

 

Restraints

Restraining rods are manufactured from M12 Dia studding, fully threaded and zonc plated, and supplied complete with four nuts and four washers. We supply standard lengths of 515mm, 595mm, 715mm and 805mm. Non-standard lengths and M10 dia studding can be supplied as required.

 

For more details and information, please refer to our Mezzanine Sections brochure, or contact a member of our dedicated sales team.

 

In This Section:

Our site uses cookies