Secondary Floor Beams

Secondary Floor Beams

 

Secondary Mezzanine Floor Beams 

 

Manufactured by cold roll forming of pre-hot dipped galvanised strip to BS EN 10346, BW floor beams have a minimum yield strength of 450N/mm² and Z275 coating.

Our standard range of secondary beams are rolled to order in any lengths required up to an impressive 18m+.

 

Range Gauges mm
M125 1.3, 1.4, 1.5, 1.6, 1.8, 2.0
M150 1.3, 1.4, 1.5, 1.6, 1.8, 2.0
M175 1.3, 1.4, 1.5, 1.6, 1.8, 2.0, 2.3, 2.5
M200 1.4, 1.5, 1.6, 1.8, 2.0, 2.3, 2.5
M225 1.5, 1.6, 1.8, 2.0, 2.3, 2.5
M250 1.6, 1.8, 2.0, 2.3, 2.5, 2.9
M300 2.0, 2.3, 2.5, 2.9
M350 2.3, 2.5, 2.7, 3.0
M400 3.0, 4.0, 5.0
M425 3.0, 4.0, 5.0
M450 3.0, 4.0, 5.0
M475 3.0, 4.0, 5.0
M500 3.0, 4.0, 5.0

 

Range Depth mm Flange mm Lip mm Hole mm Diameter of Hole mm
M125 125 52 17 40 14
M150 150 50 17 45 14
M175 175 64 17 48 14
M200 200 66 17 50 14
M225 225 78 17 53 14
M250 250 85 17 55 18
M300 300 90 19 58 18
M350 350 95 21 60 18
M400 400 100 25 65 18
M425 425 90 23 67 18
M450 450 125 25 70 18
M475 475 113 25 73 18
M500 500 100 25 75 18

 

 

Detail  sheets for BW's standard range of Mezzanine Beams are available in PDF format from the Downloads section.

 

In This Section:

Our site uses cookies