Cee Purlin Sections & Sleeves

Cee Purlin Sections

Cee Purlin Sections

RangeGauges mm
C1211.3, 1.4, 1.5, 1.6, 1.8, 2.0
C1411.3, 1.4, 1.5, 1.6, 1.8, 2.0
C1511.3, 1.4, 1.5, 1.6, 1.8, 2.0
C1711.3, 1.4, 1.5, 1.6, 1.8, 2.0, 2.3, 2.5
C2011.4, 1.5, 1.6, 1.8, 2.0, 2.3, 2.5
C2311.5, 1.6, 1.8, 2.0, 2.3, 2.5
C2611.6, 1.8, 2.0, 2.3, 2.5, 2.9
C3012.0, 2.3, 2.5, 2.9
C3412.3, 2.5, 2.7, 3.0
RangeDepth mmFlange mmLip mmHole mm
C121121541743
C141141541743
C151151541743
C171171661743
C201201661743
C231231751743
C261261791743
C301301891943
C341341992143
  • Designed in accordance with BS EN 1993-1-3.
  • Manufactured by cold roll forming of pre-hot dipped galvanized strip to BS EN 10346 with minimum tensile strength of 450 N/mm2 and Z275 coating.
  • Section ranges are referenced ā€œCā€ followed by three digits being the overall depth in mm.
  • Individual sections are referenced ā€œCā€ followed by five digits the first three being the overall depth in mm and the final two being the gross material thickness in mm multiplied by 10.
  • Sleeve references – relace ‘C’ with ‘SL.
  • Use the BW Building Wizard Software for accurate calculations.
  • All holes are 14mm diameter unless stated otherwise. Other diameters are available on request.

Cee Purlin Sleeves

RangeDepth mmFlange mmGauge mmHole mmHole Ctrs mmLength mm
C121121542.046220574
C141141542.046240614
C151151542.046265664
C171171662.546290714
C201201662.546350834
C231231752.546410954
C261261792.9474601054
C301301892.9476001334
C341341992.9477501637
  • All holes are 14mm diameter unless stated otherwise
  • All holes are punched in pairs on standard gauge lines

Detail sheets for BW’s standard range of Cee Purlins (C Purlins) and Sleeves are available in PDF format from the Downloads section.

We use cookies to provide you with a better website. Find out more.